Crawler Goodies For Sale (Great Lead)

[RCShocker]

I have a good friend that is extremely reliable with some very nice stuff for sale. Due to a change in priorities he decided to cut his crawler loose. He usually gives me first dibs and sent me a list tonight before the stuff hits other forums and eventually ebay. All his stuff is meticulously maintained. I will be picking thru some of this stuff so if you seriously want anything, please let me know and we both can save a little bit.

Most of this stuff was intended for his Stealth Crawler.

- rc4wd 40 series mudslingers - only mounted to the wheels. never run.

- 4- axial 40 series narrowed wheels...mounts perfectly to the 'slingers. new, never run.

- a pair of hitec 645mg's (well used, but still work great)

- a pair of Integy 55t lathe motors - only about 10 runs (they're not even broken in)

a pair of hitec 5955tg steering servos - these are the 333oz. of torque digital monsters - basically new, bought for the

pair of Holmes Hobbies Crawlmaster Sport brushless motors. basically new - bought for the stealth. only about 5 indoor. JRH says he is still about 2 weeks out on getting these motors back in stock @ HH.

a few sets of rc4wd.com crawling pinions: 7 tooth, 9 tooth, and i think 11 tooth? basically new.

- a pair of Castle Mamba Max's. again, these are programmed for crawling and only have about 8-10 short indoor runs. they work great - no problems at all.

- a Castle BEC, programmed to 6 volts. works great - no problems. has the deans parallel plugs, so it plugs in between the esc and batts with no soldering needed. it's basically new.

- Spektrum DX6 stick radio, with the gimbal lever so the left stick self centers. only about 5 runs.


_________________________________________________________


He also has a G-Made Stealth Roller that is basically new.

bent aluminum lower links- aluminum short front bumper- aluminum servo mounts- aluminum c hub axle mounts (where the lower links attach to the rear axles - more mounting options with these)- the new servo saver/link combo in front and rear- 17mm aluminum wheel widener/adapters (for my axial narrowed 40 series wheels and rc4wd.com mudslingers tires)- standard wheels/tires they come with, unglued- plus all the stock parts that came before the upgrades.



-Doug

[Threadlocker]

PM Sent

[Ruthless]

What does he want for the roller? 

[upnover]

bec and one 5995 servo pm price please

[RCShocker]

  Woah, you guys dont mess around.  I got the pm's too. I am covered up at work today so I will have to get back to you with the prices later this evening.

However, I will be hooking "The Broker" up FOC,with the owner later this evening for a deal on the whole lot. I anticipate that you will be able to see all this stuff up close and in person very soon. 

I wanted some things too so if it can be partially parted out in someway I will let you guys know.

[Threadlocker]

Thanks for the hook up Doug..Ill be waitin for his call.

Ill let you guys know how it goes

Thanks
Steve

[upnover]

Thanks for the hook up Doug..Ill be waitin for his call.

Ill let you guys know how it goes

Thanks
Steve

you a RC nut...looking for the 5955 servos and bec..

[RCShocker]

Phone numbers have been sent in both directions.

Good Luck 

[upnover]

Phone numbers have been sent in both directions.

Good Luck 

cool fingers crossed

[ClodMaxx]

wassup guys -

doug, thanks for the kind words. you rock.

it sounds like a deal has been made, so hopefully everyone will be happy.  until then, here are a couple pics...

thanks again, one and all...
-scott

[RCShocker]

doug, thanks for the kind words. you rock.

it sounds like a deal has been made, so hopefully everyone will be happy.  until then, here are a couple pics...

thanks again, one and all...
-scott

Well, that's just teasing us now Scott  Rig looks real nice though. Cant wait to see it up close. I'm sure to be jealous.

You are definately welcome as well my friend. You have hooked me up quite nicely......."thru our builds" and I am very happy to be able to return the favor.


-Doug

[Threadlocker]

Deal is pending fellas!! I bought the Whole Lot... Thanks Scott!!! ill call ya later today to wrap up..

Thanks
Steve

[Threadlocker]

PM Sent to ya Scott to get Paypal Info..

Thanks
Steve

[Threadlocker]

Payment has been made!!

Look forward to seeing it soon

Thanks Again

Steve

[Cajun]

Payment has been made!!

Look forward to seeing it soon

Thanks Again

Steve

Somehow I knew you'd end up with that G-Made.