Rock Crawler Mods Round One

[Cajun]

I just finished up the real first round of mods on my AX10 here's a few pics. Still need to add 20mm buttons at the lower chassis connection, I didn't have any on hand. I ran it at High Rock Lake yeaterday and I'm very happy with how everything came out. The lowered COG (about 5/8") really help keep it planted on the rocks and I didn't even notice the loss of belly clearance.


Hot Racing aluminum skid plate:


TCS goodies, internal springs, front and rear 4 links:


A little extra weight for the rear axle:


Axial slipper clutch:


Did a quick little mod to the tranny output shafts, added a couple of drill dimples so the set screws won't slip anymore (thanks Kelly):


TCS delrin battery trays and 3/4" battery straps:


8 cell pack:


(6) cell pack:


Rear boomerang, inverted shocks w/ internal springs:



Nekked Integy 60T and the new slipper:


Front 4 link and shocks:


Belly clearance about 2 5/8":



Posey flex:


Body on:

[Ruthless]

Great looking set-up    I gots to have one

[Uroplatus]

Looks great...

you running the internals in those shock over or under?

[Cajun]

I'm running the springs under the baffle, not over the shaft. It's worked out to somewhat of a semi droop, so far I like it.

[upnover]

ahhhh thats the smallest HR chassis I ever seen ... but it would make a nice skid....

[Cajun]

ahhhh thats the smallest HR chassis I ever seen ... but it would make a nice skid....

I don't know what you mean....