Castle released a software update for the MM

[mkrusedc]

Hopfully this will help with the cogging problem that MMs have with 4 pole motors like the Neu.

http://www.castlecreations.com/downloads/frh-mamba_max.html

[Cajun]

Hopfully this will help with the cogging problem that MMs have with 4 pole motors like the Neu.

http://www.castlecreations.com/downloads/frh-mamba_max.html

Cool, thanks Mark!

[Miller Time]

Cajun - you have the MM 25 right? Is there a dataport for the Castlelink on it? That RC18 I bought has the esc mounted down in a tight spot so I can't really tell and didn't want to take it out if not.

[Cajun]

Cajun - you have the MM 25 right? Is there a dataport for the Castlelink on it? That RC18 I bought has the esc mounted down in a tight spot so I can't really tell and didn't want to take it out if not.

No, I thought it came with one but you have to buy a separate "link" that plugs into an open slot in the same reciever as the ESC and you program it that way for the Mamba 25.

http://www.castlecreations.com/products/castle_link.html

The Mamba Max has it built in. I'm going to buy one eventually, I want to be able to control the throttle curve more than anything.