Getting Closer

[macr0w]

I just ordered a Neu 1512/1.5/D/F for my project I have been working on.

I am kinda waiting on the MMM to hit the street before I commit to a controller. I was thinking about the MGM 16018 but I hear there are some issues with those.

I still need a controler, a battery pack, a new charger and maybe a ubec depending on what controller I get. I have my battery and charger picked out. I just haven't bought them yet.

I can't wait to see this thing rolling.  

[Cajun]

Sounds FAST!

[orangecrush]

Do yourself a favor, set it up with a 4s battery. I just did the same setup using a 5s and the choices for controllers are limited.

I'm using the 16018 controller and with the 5s, it literally is uncontrollable doing a 360 forwards or backwards just by hitting the throttle.

I'm having issues setting up the 16018 right now....as a matter of fact, I'm on the phone with Spektrum making sure I don't have some stupid setting misadjusted.

If I had to do it again, I'd go with a 4S setup leaving me a lot more controller choices.

HTH's,

Mark

[macr0w]

These are the packs I'm looking at.
http://www.bphobbies.com/view.asp?id=B2492564&pid=NPQ7162

If you run a Neu 1512/1.5/D/F on a 5s pack you will smoke it. It's 3200 kv. You'd be looking at 59,200 rpm.

It'd be fun while it lasted I'm sure.  :lol:

[RC Shocker]

Yeah, The MMM seems like it might actually hit the market this time   :shock:

But you just never know with C.C.

[Cajun]

Yeah, The MMM seems like it might actually hit the market this time   :shock:

But you just never know with C.C.

I'm hoping it hits the market just in time for my E-Revo rebuild...

[orangecrush]

These are the packs I'm looking at.
http://www.bphobbies.com/view.asp?id=B2492564&pid=NPQ7162

If you run a Neu 1512/1.5/D/F on a 5s pack you will smoke it. It's 3200 kv. You'd be looking at 59,200 rpm.

It'd be fun while it lasted I'm sure.  :lol:

Man, I'm sorry,  I thought you bought a 1515..

my bad.


Mark

[macr0w]

These are the packs I'm looking at.
http://www.bphobbies.com/view.asp?id=B2492564&pid=NPQ7162

If you run a Neu 1512/1.5/D/F on a 5s pack you will smoke it. It's 3200 kv. You'd be looking at 59,200 rpm.

It'd be fun while it lasted I'm sure.  :lol:

Man, I'm sorry,  I thought you bought a 1515..

my bad.


Mark

That's ok.

I got the 3200kv so I could get the most out a smaller pack. With this vehicle I don't want to have to run anything bigger than a 4s pack.

Yeah, The MMM seems like it might actually hit the market this time Shocked

But you just never know with C.C.

Yeah I'm kinda counting on them right now. I could get a Mamba Max and modify it a bit and it would probably hold up for a while.

But that 30c Polyquest teamed up with a 3200 kv Neu could have bursts up to 200 amps.

 :twisted:  Oh boy! I can't wait.  :twisted:

[Cajun]

But that 30c Polyquest teamed up with a 3200 kv Neu could have bursts up to 200 amps.

 :twisted:  Oh boy! I can't wait.  :twisted:

Holy amp draw Batman!

I'm afraid, my freind, a MM wouldn't last long in that system.

[macr0w]

There is a bunch of guys who are drilling a bunch of holes in the Mamba case and putting a fan on the top and bottom of them and getting along pretty good.

I'm not sure I want to do all that. I'd rather have a system that is built to handle the juice.  

[mkrusedc]

MGM Compro has annouced that after Feb 18 thier controllers will have a software upgrade that will fix many of the problems people are reporting.  Also, with this new upgrade future upgrades will be downloadable off the internet.

[macr0w]

That will be interesting to see how that goes. I hope it goes well for MGM's sake with the MMM coming out.

Of course that's only if the MMM turns out to be all it's cracked up to be.  

[macr0w]

Okay, Here is what I'm talking about. Mugen MBX5 Prospec.

A few preliminary pics. I still don't have an ESC or battery pack.

[RC Shocker]

Sweeeeet !!!!!!!

I like it already Mark.  

Almost looks like 3 battery trays......almost  

[Cajun]

That's gonna be awesome! I can't wait to see it run.